top of page
IMG_2650.JPG
overlay-white.png

Services

Your Local Heating and Air Professionals

Call Us : 931-627-9021

Untitled-1.png
Unknown-2.jpeg

The Benefits of an AC Tune-UP

Reduces Energy Bills

Energy Efficient

Extends Life of AC Unit

Lowers Humidity

Provides In-Home Comfort

Decreases Energy Usage by 20-50%

Current Savings on a Tune-Up

american-standard-hvac-unit_orig.jpg
AFTER CLEANING
BEFORE CLEANING

Here is a List of the 21 Individual Operations We will Perform on Your Furnace

  1. Combustion Analysis for increased safety & efficiency

  2. Heat Exchanger - Visual & Camera Inspection (if accessible)

  3. Inspect for combustible material around furnace

  4. Test ignition system for safe & proper operation

  5. Test air flow duct system for carbon monoxide

  6. Test exhaust system for proper venting

  7. Measure temperature difference: supply/return

  8. Test safety & control circuits for proper operation

  9. Inspect filter, 1" standard filter replaced as needed 

  10. Inspect & adjust fan belt tension

  11. Lubricate blower motor & clean air vents

  12. Vacuum & inspect burners

  13. Check condensate drain line

  14. Clean & test thermocouple for proper operation 

  15. Inspect pilot burner

  16. Lubricate all moving parts per manufacturer specs

  17. Measure amperage and voltage of blower motor

  18. Tighten & inspect all electrical wiring

  19. Check & level thermostat

  20. Test for natural gas leaks

  21. Clean furnace exterior

Here is a List of the 21 Individual Operations We will Perform on Your Conditioning

  1. Evaporator Coil Camera Inspection (where accessible)

  2. Clean or replace 1" standard filter as needed

  3. Check blower motor for proper amperage draw, voltage and wiring connections

  4. Check condenser motor for proper amperage draw, voltage and wiring connections

  5. Check compressor for proper amperage draw, voltage and wiring connections

  6. Lubricate all motors

  7. Check and level thermostat

  8. Inspect condensate drain (if accessible)

  9. Inspect condenser coil

  10. Confirm proper charge

  11. Inspect safety devices for proper operation

  12. Inspect disconnect for any loose connections

  13. Tighten all electrical wiring

  14. Test/inspect contactors for burned/pitted contacts

  15. Measure temperature difference: supply/return

  16. Check sub-cooling/superheat

  17. Inspect electrical compartment

  18. Test and inspect capacitors

  19. Inspect fan blade

  20. Check all time delays

  21. Inspect service valves 

bottom of page